Universal: Compatible with most of the kits

Stable into 2 Ohms (stereo)

1 x 200W rms available into 4 Ohm

Product Type	Amplifier
Nominal power measured at 13.8v continuously @ 4 Ohm	2 x 75w RMS
Nominal power measured at 13.8v continuously @ 2 Ohm	2 x 100w RMS
Power in bridged mode measured at 13.8v continuously @ 4 Ohm	1 x 200w RMS
Signal / noise ratio	> 100dB (A)
Damping factor at 4 Ohm	> 500
Frequency response	10 Hz - 35kHz
Input impedance	13 kOhms
Input sensitivity	0.2 - 5v
High-pass filter	50 - 150Hz (12dB.oct.)
Low-pass filter	50 - 150Hz (12dB.oct.)
Maximum cross section of loudspeaker cables	10mm2 - 7 AWG
Maximum cross section of power cables	25mm2 - 3 AWG
Idle current	0.8A
Protection	Short circuit Continuous power Thermal overload Soft clipping Overvoltage Polarity reversal
Dimensions	50 x 230 x 280mm (2 x 9 x 11")
Weight	3.10kg (6.33lbs)